FAQs by Product Category | EIZO CORPORATION

Support

FAQs

Product Categories

ColorEdge

No.	Question	Category	Date
1	What OSes are compatible with ColorNavigator?	ColorEdge
2	What are the differences between ColorEdge monitors and…▼ What are the differences between ColorEdge monitors and FlexScan monitors?	ColorEdge
3	What are the differences between USB Rev1.1 and USB Rev…▼ What are the differences between USB Rev1.1 and USB Rev2.0?	FlexScan ColorEdge FORIS
4	Monitor shows incorrect color and non-smooth tone when …▼ Monitor shows incorrect color and non-smooth tone when connecting Mac via HDMI cable.	FlexScan ColorEdge FORIS	February 7, 2023
5	When connecting via HDMI, I cannot set the monitor to i…▼ When connecting via HDMI, I cannot set the monitor to its native resolution but I can set it to 1920x1080. Why?	ColorEdge	June 3, 2013
6	What is the difference between a built-in calibration s…▼ What is the difference between a built-in calibration sensor and a built-in correction sensor?	ColorEdge	June 4, 2013
7	What graphics boards support the EV2730Q, EV2736W, CG27…▼ What graphics boards support the EV2730Q, EV2736W, CG277 and CX271?	FlexScan ColorEdge	December 19, 2014
8	Why EIZO software such as ScreenManager Pro or ColorNav…▼ Why EIZO software such as ScreenManager Pro or ColorNavigator cannot recognize the EIZO monitor connected to the USB 3.0 port of the PC?	FlexScan ColorEdge FORIS RadiForce	January 5, 2015
9	Why is the screen distorted on the right edge of the mo…▼ Why is the screen distorted on the right edge of the monitor when connected to Mac Pro (Late 2013) via DisplayPort?	FlexScan ColorEdge	May 26, 2015
10	Is it ok to setup the monitor on painted surface?	FlexScan ColorEdge FORIS DuraVision RadiForce Accessories	January 20, 2015
11	Why the monitor displays wrong color and non-smooth ton…▼ Why the monitor displays wrong color and non-smooth tone when connecting Mac via Mini DisplayPort cable?	FlexScan ColorEdge FORIS	March 17, 2015
12	Why doesn't ColorNavigator Ver.5 start in multi-m…▼ Why doesn't ColorNavigator Ver.5 start in multi-monitor environment?	ColorEdge	May 1, 2015
13	Can I use the monitor in environment with corrosive gas…▼ Can I use the monitor in environment with corrosive gas?	FlexScan ColorEdge FORIS DuraVision Raptor RadiForce Accessories	June 11, 2015
14	The monitor connected via DisplayPort does not show any…▼ The monitor connected via DisplayPort does not show any image.	FlexScan ColorEdge RadiForce	August 21, 2015
15	Why the signal error is displayed and there are no imag…▼ Why the signal error is displayed and there are no image on the screen, when playing Blu-ray video on the player device connected via HDMI?	FlexScan ColorEdge FORIS	March 10, 2016
16	In some applications, tone characteristics and the colo…▼ In some applications, tone characteristics and the color of the image are not displayed correctly causing low tones to appear lost.	ColorEdge	April 6, 2016
17	RGB high tones (Especially green) are lost when HDMI co…▼ RGB high tones (Especially green) are lost when HDMI connection used on the CG3145 / CG319X.	ColorEdge	June 28, 2018
18	When using ColorEdge calibrated by ColorNavigator 6 and…▼ When using ColorEdge calibrated by ColorNavigator 6 and Chrome version.68 or later, colors not displayed correctly.	ColorEdge	February 21, 2019
19	ColorNavigator 7 language pack (zip file) automatically…▼ ColorNavigator 7 language pack (zip file) automatically extracted when downloaded.	ColorEdge	March 22, 2019
20	Does the round part on the top side of EX3 and EX4 ligh…▼ Does the round part on the top side of EX3 and EX4 light up when running measurements?	ColorEdge	August 2, 2019

＜ 2 3 4 5 6 ＞