Reference
Using Multiple EV4340X Units
If the "Monitor ID" of EV4340X and the "Remote ID" of the remote control have the same setting value, you can adjust/set EV4340X using remote control operations ("Monitor ID" default setting: "1", "Remote ID" default setting: "1").
In an environment where multiple EV4340X are installed nearby, if you want to adjust/set each EV4340X individually using the remote control, you will need to change the "Monitor ID" of the second and subsequent EV4340X from the default settings. When adjusting/setting the EV4340X with the changed "Monitor ID" using the remote control, you also need to change the "Remote ID" of the remote control to match the "Monitor ID."
The ID can be set from "1" to "4," and up to four EV4340X units can be operated individually.
Follow the steps below to change the ID.
- Change each "Monitor ID" of EV4340X to a setting value ("1" to "4") that does not overlap (see Monitor ID).
- Change the "Remote ID" of the remote control to the same setting value ("1" to "4") of EV4340X that you want to adjust/set.
Press
(VOL+) / 
(BRIGHT+) / 
(VOL-) / 
(BRIGHT-) while holding down "PAIRING" on the remote control. - "PAIRING" + (VOL+): 1
- "PAIRING" + (BRIGHT+): 2
- "PAIRING" + (VOL-): 3
- "PAIRING" + (BRIGHT-): 4
- The Remote ID will be changed.
Note
- When you press "PAIRING" on the remote control, the "Monitor ID" and "Remote ID" are displayed. The IDs are displayed even when the "Monitor ID" and "Remote ID" do not match.
- You can power on and off all EV4340X units at once by doing the following: Even if the "Monitor ID" and "Remote ID" do not match, the power of all EV4340X units within the remote control reception range will be turned on or off.
- While pressing and holding "PAIRING" on the remote control, press "ON" (power on) or "OFF" (power off).
Using the Docking Station Function
This product is equipped with a LAN port and USB hub so that it can be used as a docking station. By connecting a USB-C cable, you can create a stable network environment even on notebook PCs or tablet devices that are not equipped with LAN ports. In addition, peripheral devices that support USB can be used, and smartphones can be charged.
- Connect a USB-C cable (CC200SS-5A or CC200SSW-5A).
- Connect the LAN cable to the monitor's LAN port.
- If necessary, connect a mouse, keyboard, or other device to the USB downstream port.
Attention
- This function may not work depending on the PC you are using, your OS, and your peripheral devices. Contact the manufacturer of each device for information about USB compatibility.
- Even when the monitor is in power saving mode, devices connected to the USB downstream port are operational. Due to this, the power consumption of the monitor varies depending on the connected devices, even in power saving mode.
- When the main power switch of the monitor is off, a device connected to the USB downstream port will not operate.
- When "Compatibility Mode" is set to "Off" and the monitor power is turned off, devices and LAN ports connected to the USB downstream port are not operational.
Note
- The MAC address can be found on the back of the monitor. MAC address pass-through is not supported.
- By using the EIZO MAC Address Clone Utility, you can temporarily replace the MAC address of the EIZO monitor with the MAC address of the computer. For more information about the EIZO MAC Address Clone Utility, refer to our web site. (www.eizoglobal.com/products/flexscan/mac-address-clone/ )
- This product supports USB 5Gbps. When connecting to peripheral devices that support USB 5Gbps, high-speed data communication is possible.
For USB-C connection, you can switch between display signal priority "4K 60Hz / USB 2.0" and USB speed priority " 4K 30Hz / USB 5Gbps" (see Signal Format - USB-C). The default setting is "4K 60Hz / USB 2.0" and the maximum USB transfer speed is 480 Mbps. - For USB-B connection, the LAN port cannot be used.
Specifications
LCD Panel
Type | IPS (Anti-Glare) | |
Backlight | LED | |
Size | 42.5" (108.0 cm) | |
Resolution | 3840 dots x 2160 lines | |
Display Size (H x V) | 941.2 mm x 529.4 mm | |
Pixel Pitch | 0.245 mm x 0.245 mm | |
Display Colors | 8-bit colors | 16.77 million colors |
Viewing Angle (H / V, typical) | 89˚/89˚ | |
Response Time (typical) | Middle Tone Area | 8 ms (overdrive setting: Standard) |
5 ms (overdrive setting: Enhanced) | ||
Video Signals
Input Terminals | DisplayPort (HDCP 1.3/2.3 compatible) x 1 HDMI (HDCP 1.4/2.3 compatible) *1 x 2 USB-C (DisplayPort Alt Mode, HDCP 1.3/2.3 compatible) x 1 | |
Digital Scanning Frequency | DisplayPort | Horizontal: 31 kHz – 134 kHz Vertical: 29 Hz – 61 Hz, 69 Hz – 71 Hz (at 720 x 400) |
HDMI | Horizontal: 31 kHz – 135 kHz Vertical: 29 Hz – 61 Hz, 69 Hz – 71 Hz (at 720 x 400) | |
USB-C | Horizontal: 31 kHz – 134 kHz Vertical: 29 Hz – 61 Hz, 69 Hz – 71 Hz (at 720 x 400) | |
Frame Synchronization Mode | 59.5 Hz – 60.5 Hz | |
Max. | DisplayPort | 540 MHz |
HDMI | 600 MHz | |
USB-C | 540 MHz | |
- HDMI CEC (mutual control) and ARC function (audio return channel function) are not supported.
USB
Port | Upstream | USB-C (USB 5Gbps) *1 x 1 USB-B (USB 5Gbps) x 1 |
Downstream | USB-A (USB 5Gbps) x 2 USB-C (USB 5Gbps) x 1 | |
Standard | USB 3.2 Gen1 | |
Communication Speed | 5 Gbps, 480 Mbps, 12 Mbps, 1.5 Mbps | |
Power Supply | Upstream | USB-C (USB 5Gbps): Maximum 94 W (5 V/3 A, 9 V/3 A, 15 V/3 A, 20 V/4.7A) |
Downstream | USB-A (USB 5Gbps): Maximum 900 mA per port*2 USB-C (USB 5Gbps): Maximum 15 W (5V/3A)*2 | |
- Supports Pin Assignment E. The optional accessory CP200 (USB-C - DisplayPort) can be connected to the DisplayPort connector of the PC.
- The USB-C connector and USB-A connector on the side of the monitor can supply power even if the PC and the monitor are not connected via USB. The USB-A connector on the back of the monitor can supply power even if the PC and the monitor are not connected via USB.
Audio
Audio Input Format | 2ch linear PCM (32 kHz / 44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192 kHz) |
Speakers (Standard value) | 4 W + 4 W |
Headphones | 2 mW + 2 mW (32 Ω) |
Input Terminals | DisplayPort x 1 HDMI x 2 USB-C (DisplayPort Alt Mode) x 1 (each shared with video signals) |
Output Terminals*1 | Headphone jack x 1 |
- When outputting audio from the monitor's speakers, do not connect devices to the headphone jack.
Network
Port | RJ-45 (USB LAN adapter) |
Supported Operating Systems*1 | Windows 11 Windows 10 (32 bit / 64 bit) macOS Sierra (10.12) or later |
Wired LAN | IEEE802.3ab (1000BASE-T) IEEE802.3u (100BASE-TX) IEEE802.3 (10BASE-T) |
- EIZO support will end when OS vendor support ends.
Power
Input | 100 - 240 VAC ±10 %, 50 / 60 Hz, 2.45 - 1.10 A |
Maximum Power Consumption | 243 W or less |
Power Save Mode (standard value) | 0.4 W (USB device not connected, external load not connected, with only one input (either DisplayPort or HDMI)) |
Standby Mode (standard value) | 0.3 W (external load not connected, with only one video signal input excluding DisplayPort) |
Physical Specifications
Dimensions | 966.8 mm x 631.0 mm x 225.2 mm (W x H x D) |
Dimensions (without stand) | 966.8 mm x 571.0 mm x 89.9 mm (W x H x D) |
Net Weight | Approx. 15.9 kg |
Net Weight (monitor, without VESA cover) | Approx. 15.2 kg |
Operating Environmental Requirements
Temperature | 5 ˚C – 35 ˚C |
Humidity | 20 % – 80 % R.H. (no dew condensation) |
Air Pressure | 540 hPa – 1060 hPa |
Transportation / Storage Environmental Requirements
Temperature | -20 ˚C – 60 ˚C |
Humidity | 10 % – 90 % R.H. (no dew condensation) |
Air Pressure | 200 hPa – 1060 hPa |
Accessories
For the latest information about accessories, refer to our web site.