8. SPECIFICATIONS

LCD Panel 54 cm (21.3 inch), TFT color LCD panel with Anti-Glare Hard Coating
Viewing Angle: H: 170°, V: 170°
(at contrast ratio 1:5)
Response Time: approx.50 ms
Dot Pitch 0.270 mm
Horizontal Scan Frequency Analog: 24 - 94 kHz (Automatic)
Digital: 31 - 76 kHz
Vertical Scan Frequency Analog: 49 - 86 Hz (Automatic)
(1600 x 1200: 49 - 76 Hz)
Digital: 59 Hz - 61Hz, (VGA Text : 69 - 71 Hz)
Resolution 1600 dots x 1200 lines
Dot Clock (Max.) Analog: 202.5 MHz, Digital: 162 MHz
Display Colors 16 million colors (max.)
Display Area 432 mm (H) x 324 mm (V) (17.0" (H) x 12.8" (V)) (Viewable image size: 540 mm (21.2"))
Power Supply 100-120VAC±10% 50/60 Hz, 0.7A
200-240 VAC±10%, 50 Hz, 0.4 A
Power Consumption Min.: 60 W
Max: 65 W (With speaker)
Power Saving Mode : Less than 3 W
Input Connector DVI-I , D-Sub mini 15 pin
Analog Input Signal (Sync) a) Separate, TTL, Positive/Negative
b) Composite, TTL, Positive/Negative
Analog Input Signal (Video) 0.7Vp-p/75 ohms, Positive
Input Signal (Digital) TMDS (Single Link)
Signal registration Analog : 45 (Preset: 27)
Digital : 10 (Preset: 6)
Plug & Play VESA DDC 2B
Dimensions 472 mm (W) x 459 - 541 mm (H) x 208.5 mm (D)
(18.6"(W) x 18.1"- 21.3"(H) x 8.2"(D))
Dimensions (without stand) 472 mm (W) x 373 mm (H) x 69 mm (D)
(15.7"(W) x 14.7"(H) x 2.7"(D))
Weight 10.2 kg (22.5 lbs.)
Weight (without stand) 7.0 kg (15.4 lbs.)
Temperature Operating: 0 °C - 35 °C (32 °F - 95 ° F)
Storage: -20 °C - 60 °C (-4 °F - 140 ° F)
Humidity 30% to 80% R.H. Non-condensing
USB standard Rev. 1.1 complied
USB ports Upstream port x 1
Certifications and Standards
100-120 VAC 
NRTL/C-TÜV, FCC-B, TCO'03*1, TCO'99*2, EPA ENERGY STAR Program, TÜV/Rheinland Ergonomics Approved
Certifications and Standards
200-240 VAC
CE, CB, TÜV Rheinland/GS, TCO'03*1, TCO'99*2, EPA ENERGY STAR Program, TÜV/Rheinland Ergonomics Approved
Image Formation Time*3 Max: 97 ms
*1 Applicable to gray (standard) color version only.
*2 Applicable to black color version only.
*3 Test result according to the ISO 13406-2 standard from a certifiled testing laboratory.

Default settings

Analog input
Digital input
Brightness
100%
100%
Smoothing
3
Temperature
6,500K
FineContrast Mode
Custom
PowerManager
VESA DPMS
DVI DMPM
Screen Size
Full
Input Priority
Signal 1
Off Timer
Disable
Menu Settings Menu Size
Normal
Menu Off Timer
45 seconds
Beep
On
Language
English
Input Selection
Standard

 

Beeper settings

Short beep ScreenManager item selected.
ScreenManager parameter adjusted to minimum or maximum limit.
Input Signal Selection button pressed.
Long beep Auto Adjustment button pressed.
ScreenManager data-save executed.
4 short beeps Monitor not connected correctly.
PC turned off.
Monitor received unsupported signal frequency.
2 short beeps every 15 sec. Monitor is in the advance notice mode of the Off Timer. The power will be off within fifteen minutes.

Dimensions

Unit mm (inches)

 

Pin Assignment

DVI-I Connector
Pin No.
Signal
Pin No.
Signal
Pin No.
Signal
1
TMDS Data 2-
11
TMDS Data 1/3 Shield
21
NC
2
TMDS Data 2+
12
NC
22
TMDS Clock Shield
3
TMDS Data 2/4 Shield
13
NC
23
TMDS Clock+
4
NC*
14
+5V Power
24
TMDS Clock-
5
NC
15
Ground (return for +5V, Hsync and Vsync)
C1
Analog Red
6
DDC Clock (SCL)
16
Hot Plug Detect
C2
Analog Green
7
DDC Data (SDA)
17
TMDS Data0-
C3
Analog Blue
8
Analog Vertical Sync
18
TMDS Data0+
C4
Analog Horizontal Sync
9
TMDS Data1-
19
TMDS Data0/5 Shield
C5
Analog Ground (analog R, G, & B return)
10
TMDS Data1+
20
NC
(*NC: No Connection)
D-Sub mini 15 pin connector
Pin No.
Signal
Pin No.
Signal
Pin No.
Signal
1
Red Video
6
Red ground
11
Ground Shorted
2
Green Video
7
Green ground
12
Data (SDA)
3
Blue Video
8
Blue ground
13
H. Sync
4
Ground
9
No pin
14
V. Sync
5
No pin
10
Ground Shorted
15
Clock (SCL)
USB Ports
No.
Signal
Signal
1
VCC
Cable power
2
-Data
Serial data
3
+Data
Serial data
4
Ground
Cable Ground