ScreenManager allows you to adjust screen performance though the main menu and select a FineContrast mode easily.
Press the Enter Button once to display the main menu of the ScreenManager.
2. Making Adjustments and Settings
FineContrast Menu Directly pressing the Mode button allows you to select the best suited mode for screen display from 5 FineContrast modes; Custom, sRGB, Text, Picture and Movie. To exit the menu, press the Enter button. |
The following table shows all the ScreenManager's adjustment and setting menus.
"*" indicates adjustments of analog input only and "**" indicates digital input only.
Color (Custom)* 1 |
||||
Set the monitor's Off Timer. |
||||
Set the menu displaying time.* 2 |
||||
Return to the factory Default settings. |
||||
Review the ScreenManager's settings, model name, serial number and usage time.* 3 |
||||
English, German, French, Spanish, Italian, Swedish and Japanese |
*1 The adjustable functions on the <Color> menu depend on the selected FineContrast mode. The above table shows the sub menus when the "Custom" mode is selected (see "4-2. Color Adjustment").
*2 The displaying time of the FineContrast Menu cannot be changed.
*3 Due to the inspection on the factory, the usage time may not "0 hour" at shipping.
This function allows you to select the best suited mode for screen display.
Directly pressing the Mode button allows you to select the best suited mode for screen display from 5 FineContrast modes; Custom, sRGB, Text, Picture and Movie.
Press the Enter button to exit the menu. Leaving the Mode button untouched more than 5 seconds also exits the menu.
Selectable FineContrast modes are as follows.
To display the screen images based on those original colors (ex. over the Internet) |
|
The color settings of each mode can be adjusted by using the <Color> menu of the ScreenManager. (See "4-2. Color Adjustment".)
Use the "Adjustment Lock" function to prevent any accidental changes.
The off timer function causes the monitor to automatically enter a power off state after a predetermined amount of time has lapsed. This function was created to reduce Afterimage characteristics that are particular to LCD monitors when the monitor screen is left on for a long period without use.
Advance Notice* 1 |
||
*1 Advance notice (Power Indicator flashing blue) will be given 15 minutes before the monitor automatically enters the "Power Off" mode. To delay entering the "Power Off" mode, press the power button during the advance notice period. The monitor will continue to operate for an additional 90 minutes.
When switching on the power button on the front panel, the EIZO logo is displyed for a while. If you desire to display or undisplay this logo, use this function. (Default is logo appearing.)
Switch off the monitor's power by the power button, then hold down the Enter button once again and turn the power back on.
Switch off the monitor's power by the power button, then hold down the Enter button once again and turn the power back on.
The monitor will automatically detect the inputted signal of either the connection for display. (Default: this function is set ("Auto").)
Use the ScreenManager to switch the input selection to manual.