Update from 6.4.23 to 6.4.24
- Firmware version 1.34 of CR-250 is supported.

Update from 6.4.22 to 6.4.23
Following problem is fixed.
- Communication error is occurred with i1 Display 3/Pro.

Update from 6.4.19 to 6.4.22
- CG319X is supported.
- PQ and HLG gamma curve are supported.
- Colorimetry Research CR-300 is supported.
- Fogra 53 and Fogra 54 are supported.
- Photoshop CC 2018 is supported.
- Environmental construction support function is added.
- Default profile version is changed from Ver.2.2 to Ver.4.

Update from 6.4.19 to 6.4.19B
- Installation problem is fixed.

Update from 6.4.18 to 6.4.19
- Improved software 

Update from 6.4.15 to 6.4.18
- Photoshop CC 2017 is supported (CMYK type validation).
- Measurement time of Spyder/EX sensor is shortened.
- Some issues are improved.

Update from 6.4.14 to 6.4.15
- CS2730 and CG2730 are suppoted.
- Photoshop CC 2015.5 is supported (CMYK validation).
- Some issues are corrected.

Update from 6.4.13 to 6.4.14
- CG247X is supported.
Following problems are improved.
- Incorrect LUT is applied to the monitor when you read 10-bit profile.
- ColorNavigator clashes when you read non-standard profile of ICC.
- Other

Update from 6.4.12 to 6.4.13
- Firmware updating of CG318-4K, CG248-4K, CG277 and CG247 is suppoted.
- [Standard] adjustment algorithm is improved.
- LUT sample file is added.
- 10-bit (1024 tones) LUT is settable.
- Fogra 51 and 52 are supported. 

Update from 6.4.11.6 to 6.4.12
- Support added for CG2420 and CS2420.
- Added Colorimetry Reserch CR-100/CR-250 to compatible sensors.
- Model restrictions of device profiler abolished.
- Preset targets attached.
- Improved some issues.

Update from 6.4.10.9 to 6.4.11.6
- Support German language.

Update from 6.4.10.7 to 6.4.10.9
- Improved the problem which ColorNavigator 6 using external calibration sensor might hang up after the manual adjustment.
- Improved some minor problems.

Update from 6.4.10.6 to 6.4.10.7
- Supported Photoshop CC (2015) to CMYK type validation.

Update from 6.4.9.20 to 6.4.10.6
- Added EX3/Spyder5 to compatible sensors.
- Added automatic update function.
- Supported Adobe Acrobat DC to CMYK type validation.
- Added brightness information to DCI ICC profile.
- Attached Rec.2020 ICC profile.
- Supported the target change function from external command.
- Improved some issues.

Update from 6.4.9.19 to 6.4.9.20
- Updated license agreement.

Update from 6.4.7 to 6.4.9.19
- Support added for ColorEdge CG318-4K, CG248-4K and CS270.
- Support removed for Windows XP and Vista.
- Support removed for DTP94 and DTP94B.
- Support removed for Photoshop CS/CS2 to CMYK type validation.
- Support added for Photoshop CC (2014) to CMYK type validation.
- Improved the accuracy of color gamut adjustment.
- Improved the sensor correlation function.
- Added the quality improvement program.
- Improved some issues.

Update from 6.4.6.8 to 6.4.7
- Support added for ColorEdge CS240.
- Supported Klein K-10 correction table function.
- Improved some issues. 

Update from 6.4.6 to 6.4.6.8
- Change printing setting of User's Manual.
- Improved some issues.
 
Update from 6.4.5 to 6.4.6
- Support added for ColorEdge CG247 and CX241.
- Supported Windows 8.1.
- Supported CMYK validation with Photoshop CC.
- Corrected DCI profile.
- Improved some issues. 

Update from 6.4.4 to 6.4.5
-Changed layout of manual adjustment.
-Changed color gamut of "Web design" target.
-Supported log view LUT of 66-grid-point.
-Improved some issues.
-Improved visibility of UI and operation flow. 

Update from 6.4.3 to 6.4.4
-Support Chinese signage for Chinese market products.

Update from 6.4.2 to 6.4.3
- Support added for Photo Research PR-655.
- Support added for Adobe Acrobat XI Pro.
- Support removed for DTP94 on Windows 8 and 7.
- Improved issue of software-launch failure.

Update from 6.4.0 to 6.4.2
- Support added for basICColor DISCUS.
- Support added for Klein K-10
- Reproducibility of less tones device with emulation function improved.
- Support added for Chinese signage.
- Adobe AIR bundled as a captive runtime.
- Change name to EIZO Corporation.

Update from 6.3.0 to 6.4.0
- Support added for Windows 8.

Update from 6.2.1 to 6.3.0
- Support added for ColorEdge CG276 and CX270.
- Support added for Adobe Photoshop CS6.
- Support added for X-Rite's new factory calibration standard "XRGA".
- Changed preset value of "Printing" from "Standard" to "Gray balance".
- Fixed issue of monitoring video card gamma.
- Fixed the other little issue.