Support
FAQs
Q.
Monitor shows incorrect color and non-smooth tone when connecting Mac via HDMI cable.
A.
When connecting Mac via HDMI cable, the monitor may show incorrect color and non-smooth tone.
In details, phenomena occurs such as:
- High tone/low tone cannot be displayed correctly
- Middle tones are skipped.
When these occur, we recommend using alternative ways than HDMI connection.
- Cause
Mac does not output full range, RGB signal but limited range, YUV signal from the HDMI port.
This is an intended behavior of Mac.
- Measures
1. Use alternative connection than HDMI.
When Mac has following output connectors, please use these connectors.
- Thunderbolt 3 (USB Type-C)
- Thunderbolt 2 (Mini DisplayPort)
- DVI
2. Change the monitor settings (ColorEdge monitor only)
You can avoid this HDMI issue with the following "Signal Format" setting.
For CG277 / CG247 / CG247X / CX271 / CX241 / CS270 / CS240
Optional Settings -> Signal Selection -> Signal Format -> HDMI
Change the setting to "PC"
For CG2700X / CG2700S / CG2730 / CG2420 / CS2740 / CS2731 / CS2730 / CS2400S / CS2420 / CS2410
Administrator Settings -> Signal Format -> HDMI
Change the setting to "PC" or "RGB" or "4K 60Hz"
Please refer to the user's manual for detailed procedure.
▼ Model:EV2360 FAQ ranking
No. | Question | Category | Date |
---|---|---|---|
1 |
FlexScan ColorEdge FORIS |
April 6, 2020 | |
2 |
FlexScan ColorEdge FORIS |
February 7, 2023 | |
3 |
FlexScan ColorEdge FORIS |
January 7, 2022 | |
4 |
FlexScan ColorEdge |
August 29, 2024 |
▼ Model:EV2360 Latest updates
No. | Question | Category | Date |
---|---|---|---|
1 |
FlexScan ColorEdge |
August 29, 2024 | |
2 |
FlexScan ColorEdge FORIS |
January 7, 2022 | |
3 |
FlexScan ColorEdge FORIS |
April 6, 2020 | |
4 |
FlexScan ColorEdge FORIS |
February 7, 2023 |