Support
FAQs
Q.
I've been disconnected from the network connected via the LAN port of the monitor (macOS).
A.
If your network is disconnected while using the built-in USB LAN adapter on your monitor, check the followings.
<1. Scenarios>
● The network is disconnected while using Zoom app
Update the app to the latest version or join Zoom Meetings from a web browser without using the app.
● The network is disconnected when switching the input signal of the monitor
When using the monitor's KVM/USB selection function to share a mouse or keyboard across multiple computers, switching the input signal will cause the USB LAN adapter to be disconnected from the network on computers that are not related to the input signal being displayed. When the input signal is returned, the USB LAN adapter is detected again, and the network is restored.
This is the intended behavior for KVM/USB selection function. Be careful when switching input signals while downloading or transferring large files.
<2. Monitor settings>
● Changing Compatibility Mode to On
Ensure that the USB LAN adapter works even when the monitor is turned off.
1. Touch the power switch on the front of the monitor to turn off the monitor.
2. Touch the switch on the far-left side and touch the power switch for at least 2 seconds to turn on the monitor.
3. Change "Compatibility Mode" to "On" in the Administrator Settings menu.
4. Select "Apply".
● (For EV3895) Changing Signal Format
*The refresh rate is limited to 30Hz.
1. Touch the power switch on the front of the monitor to turn off the monitor.
2. Touch the switch on the far-left side and touch the power switch for at least 2 seconds to turn on the monitor.
3. Select "Signal Format" in the "Administrator Settings" menu.
4. Select "WQHD+ 30Hz/USB3.1" in "USB-C".
5. Select "Apply".
● (For EV2490, EV2495, and EV2795) Changing Daisy Chain to Off
1. Touch any of the control switches on the front of the monitor (except the power switch).
2. Select the menu icon to display the Settings menu.
3. Select “Preferences” menu from the Settings menu.
4. Set "Daisy Chain" to "Off" and select the check button.
<3. OS Settings>
● Known issue with macOS
Catalina (10.15) and Big Sur (11) have a bug in the USB LAN driver built into macOS.
For more information and countermeasures, please refer to here and update macOS.
● Resetting network
1. Select "System Preferences" in the Apple menu and select "Network".
2. In the list on the left of the window, select the monitor's built-in USB LAN adapter "USB 10/100/1000 LAN".
3. Click the pop-up menu (circle mark) below the list and select "Make Service Inactive".
4. Select "Make Service Active".
● (When using DHCP) DHCP lease renewal
1. Select "System Preferences" in the Apple menu and select "Network".
2. In the list on the left of the window, select the monitor's built-in USB LAN adapter "USB 10/100/1000 LAN".
3. Click "Advanced" in the lower right corner of the window.
4. Select "TCP/IP" from the tabs at the top of the window.
5. Click "Renew DHCP Lease".
● Adding a network interface
1. Select "System Preferences" in the Apple menu and select "Network".
*If the monitor's built-in USB LAN adapter "USB 10/100/1000 LAN" is not displayed in the list on the left side, perform steps 2~4 below.
2. Click on the "+" mark below the list.
3. From the " Interface" list, select "USB 10/100/1000 LAN."
4. Enter any name in "Service Name" and click "Create".
● Updating OS
In the macOS environment, the monitor's USB LAN adapter works with the standard OS driver.
Make sure your macOS is up to date, as the OS updates may contain the latest drivers.
▼ Model:CG2700X FAQ ranking
No. | Question | Category | Date |
---|---|---|---|
1 |
FlexScan ColorEdge |
February 7, 2023 | |
2 |
FlexScan ColorEdge |
January 7, 2022 | |
3 |
ColorEdge |
January 12, 2023 | |
4 |
FlexScan ColorEdge |
August 29, 2024 | |
5 |
FlexScan ColorEdge |
February 17, 2023 | |
6 |
FlexScan ColorEdge |
December 6, 2022 | |
7 |
FlexScan ColorEdge |
July 15, 2022 | |
8 |
FlexScan ColorEdge |
September 13, 2024 |
▼ Model:CG2700X Latest updates
No. | Question | Category | Date |
---|---|---|---|
1 |
FlexScan ColorEdge |
September 13, 2024 | |
2 |
FlexScan ColorEdge |
August 29, 2024 | |
3 |
FlexScan ColorEdge |
February 17, 2023 | |
4 |
ColorEdge |
January 12, 2023 | |
5 |
FlexScan ColorEdge |
January 7, 2022 | |
6 |
FlexScan ColorEdge |
July 15, 2022 | |
7 |
FlexScan ColorEdge |
December 6, 2022 | |
8 |
FlexScan ColorEdge |
February 7, 2023 |