Support

FAQs



Order
Show Items


    Search

 

Q.

Why don't images appear when the message "No signal" is shown on the screen?

 

A.

The probable causes are as follows. 1. Signal is not input correctly from the computer. 2. The frequency of the signal sent out from the computer is out of the monitor's range. Check the following. 1. Check the signal cable is properly connected. 2. Check that the signal frequency of the computer or graphics board is properly set to match that of the monitor.

 

▼ Product Categories:FlexScan, ColorEdge, FORIS FAQ ranking

No. Question Category Date
1 FlexScan
ColorEdge
FORIS
January 20, 2015
2 FlexScan
ColorEdge
FORIS
April 6, 2020
3 FlexScan
ColorEdge
FORIS
January 7, 2022
4 FlexScan
ColorEdge
FORIS
January 5, 2015
5 FlexScan
ColorEdge
FORIS
6 FlexScan
ColorEdge
FORIS
7 FlexScan
8 FlexScan
ColorEdge
FORIS
July 31, 2020
9 FlexScan
10 FlexScan
ColorEdge
July 31, 2020
11 FlexScan
ColorEdge
August 21, 2015
12 FlexScan
ColorEdge
FORIS
March 10, 2016
13 FlexScan
ColorEdge
FORIS
14 FlexScan
ColorEdge
FORIS
March 5, 2020
15 ColorEdge
February 21, 2019
16 FlexScan
ColorEdge
17 FlexScan
FORIS
December 26, 2014
18 FlexScan
19 FlexScan
ColorEdge
FORIS
20 ColorEdge
March 22, 2019

 

▼ Product Categories:FlexScan, ColorEdge, FORIS Latest updates

No. Question Category Date
1 FlexScan
ColorEdge
FORIS
January 7, 2022
2 FlexScan
ColorEdge
July 15, 2022
3 FlexScan
ColorEdge
July 15, 2022
4 FlexScan
April 16, 2021
5 FlexScan
July 15, 2022
6 FlexScan
ColorEdge
July 31, 2020
7 FlexScan
June 29, 2020
8 FlexScan
ColorEdge
FORIS
April 6, 2020
9 FlexScan
ColorEdge
FORIS
March 5, 2020
10 ColorEdge
August 2, 2019
11 FlexScan
July 10, 2019
12 ColorEdge
March 22, 2019
13 ColorEdge
February 21, 2019
14 ColorEdge
June 28, 2018
15 ColorEdge
April 6, 2016
16 FlexScan
ColorEdge
FORIS
March 10, 2016
17 FlexScan
ColorEdge
August 21, 2015
18 FlexScan
ColorEdge
FORIS
June 11, 2015
19 ColorEdge
May 1, 2015
20 FlexScan
ColorEdge
FORIS
March 17, 2015